Aerospace industry in Latin America

Mail-SPL-468-X60-2x
As part of the process of renewing its air capabilities, the Portuguese Air Force (FAP) is preparing to incorporate the first Embraer A-29N Super Tucano light attack aircraft, a specially developed variant under NATO standards. The contract for these aircraft was signed on December 16, 2024, for twelve aircraft. The Portuguese Air Force will receive twelve before the end of the year, marking a milestone by becoming the first European operator of this model. The acquisition is part of the Close Air Support (OCMA) program, aimed at strengthening training, surveillance, fire support, and tactical intervention missions.
1747173791118.webp

The acquisition is part of the Close Air Support (OCMA) program, framed within the Military Programming Law (LPM) revised in August 2023, which allocates €180.5 million to the project. This initiative responds to the strategic needs defined by the so-called Military Vision 2022–2034, which prioritizes fixed-wing platforms capable of operating in permissive and semi-permissive environments, including possible deployments in Africa under missions such as the United Nations mission in the Central African Republic (MINUSCA).

The A-29Ns will be assigned to the 103rd Caracóis Squadron and will cover capabilities left over from the retirement of the Dassault/Dornier Alpha Jet aircraft in January 2018. In addition to advanced pilot training, the new aircraft will perform close air support (CAS), intelligence, surveillance, reconnaissance (ISR), and ground-based air strike coordination (JTAC) roles.
 
Óscar Wenceslao Mora Velázquez, director of the company EN-TI, said that Mexico will capture double the investment in the aerospace industry in the next 3 to 5 years, due to the relocation of value chains and the experience of the companies in the manufacture of aircraft parts.

“With the numbers we are seeing, investment will double very quickly,” he said during the conference Nearshoring Aerospace: Mexico's Opportunity in the New Industrial Geopolitics Institution held as part of the Aerospace Fair Mexico (Famex) 2025.

In 2024, the aerospace industry received investments for US$11.4 billion dollars, but the arrival of capital for more than US$22 million dollars is projected, said the Mexican businessman.

“Mexico has a lot of knowledge, we manufacture a lot of maquilas and telecommunications, fiber optics and lasers could follow,” said the member of the Mexican Federation of the Aerospace Industry (FEMIA).

“There are interesting movements in a world market in which Mexico is in the Top 10 of the aerospace industry”, commented the founder and member of the Organizing Committee of Famex for the last 10 years.

He added that there are interesting conversations to have a maintenance hub in the south of Mexico for the European company Airbus and Lufthansa.

Mexico's Oaxaca Aerospace has aircraft for primary military maneuvers, which have an autonomy of 5 to 10 hours of flight time.

“For the aerospace industry this is a great opportunity that is happening, despite the crisis,” he said.

He said that Mexico is a worldwide reference in the aerospace industry, since it has very strong aerospace clusters such as in Monterrey, Querétaro, Chihuahua, Baja California, and there is a strong participation in Oaxaca and Yucatán.

 
Called aboard the first electric plane made in Colombia



1747354423769.webp

More than 100 years have passed since the Wright brothers' first airplane flight on October 17, 1903. The first aviators, Wilbur and Orville Wright, recognized as the world's pioneers of aviation, built and flew the first airplane, a 35-kilogram plane equipped with a 12-horsepower engine that launched them into the air on a short flight lasting 12 seconds and traveling 36 meters.
Today, 118 years later, José Alejandro Posada Montoya, a research professor at the Pascual Bravo University Institution, is about to fly what would become the first electric airplane manufactured in Colombia. The project was born 10 years ago when the decision was made to create an electric airplane that would reduce the environmental impact of aviation on the planet, such as heat emissions, noise pollution, and CO2 and gas particles.

1747354401214.webp
The prototype is very similar to the one flown by the Wright brothers. The first tests were conducted on the Pascual Bravo soccer field, which served as the runway for the taxiing test phases. Last weekend, after obtaining the necessary permits and licenses from Aerocivil, taxiing tests began on a private runway in Bolombolo, a district of Venecia, Antioquia. These tests consist of taking the aircraft to different speeds for takeoff acceleration and braking, testing the aircraft's maneuverability on the ground, assessing the controls' response to the demands, and ensuring that the engines, batteries, and electrical components do not overheat.
"Bolombolo has an 850-meter runway. According to calculations, the aircraft's required takeoff distance is 66 meters. We have ample time to take off, stay in the air, and land safely again. Once we see that the aircraft is responding satisfactorily, we can take off and fly a circuit around the runway," says Engineer Posada. There's a bit of fear, but that's normal; it's a new aircraft that hasn't been tested in the country.
The aircraft is equipped with two lithium batteries, each with 310 cells generating 58.8 volts and 72 amp-hours as an electrical charging unit, a controller, and two permanent magnet motors, each with 10 kilowatts. Its structure is made of aeronautical aluminum covered in aeronautical fabric that complies with all safety protocols and systems.
When it comes to connectivity, the aircraft connects via Bluetooth using a smartphone, a model equipped with all the avionics to monitor the altitude, speed, current, consumption, and status of each of the batteries.
"The goal is to demonstrate that in Colombia we can carry out projects that combat climate change and reduce particulate matter in cities," he adds.
In addition to being a mechanical and aerospace engineer, Alejandro is trained as a commercial pilot and is part of the flight test team. “There's a bit of fear, which is normal. It's a new aircraft that hasn't been tested in the country and is barely being tested worldwide, but we're confident that with all the evaluations that have been done and those we will do there, it will be successful,” says the engineer.
We can proudly say that this model is the first electric aircraft built in Colombia and one of the first in Latin America.
This innovative aircraft is approximately 11 meters wide and 5.5 meters long.
This innovative aircraft is approximately 11 meters wide and 5.5 meters long. PHOTO: JAIVER NIETO ÁLVAREZ / ETCE
1747354378780.webp
There have been other advances in other countries. For example, in the United States, they converted a six-passenger plane and are working on converting a 12-passenger Cessna Alcaravan. In Europe, Slovenia manufactured the first electric aircraft with a European certification; and, by 2025, Norway expects all flights under 30 minutes to be made on electric planes. Many professors and students from the Pascual Bravo Environmental Research Institute and the Environmental Research and Innovation Group, mechanical, electrical, and electronic engineers, have contributed to the development of the project, helping the aircraft begin to accumulate flight hours.
In the future, the professor and Pascual Bravo hope to continue advancing their project to take to the skies, increasing flight time from one hour to three, and allowing for the ability to carry four passengers.
Other goals
These researchers also aim to build aircraft with greater efficiency, economy, and cargo capacity that respond to Colombia's climatic and topographical conditions.
They dream of creating a national aeronautical industry, not only for airplanes but also for buses, trains, and, in general, electric mobility for cities.

https://www.eltiempo.com/colombia/m...imer-avion-electrico-hecho-en-colombia-609590

Sugarcane growers save up to 30% on fumigation costs with ultralight aircraft
Olbar Eduardo García, manager of Fumicaña and promoter of the use of technologies such as ultralight aircraft for crop fumigation, spoke with Agronegocios.

Ximena González
February 13, 2019

Fumicaña Ltda., with more than 25 years of experience and ISO 9001 certification, has been one of the pioneering companies in offering precision agriculture aerial operations using specialized equipment, the Aero Agro AA-100 aircraft. This design is currently successfully completing its certification process as an ultralight aircraft under the European CS-VLA aeronautical standard.

Olbar Eduardo García, manager of Fumicaña and one of the promoters of the use of technologies such as ultralight aircraft for crop spraying, spoke with Agronegocios about his operation in the sugarcane fields of Valle del Cauca and how this system allows producers to save up to 30% in costs while being environmentally friendly.

What does the certification process involve?
In 2012, the Civil Aeronautics created a new Aeronautical Regulation, RAC 26 and 137, in which certain processes must be carried out in an acceptable manner, complying with the standard, in order to receive approval and obtain the Special Airworthiness Certificate and continue operating as a commercial aerial spraying company. We are currently finalizing flight test runs.

What does this certification mean for the company?
It is the start of a new commercial aerial spraying company that opens its doors to the national market with the best technology and low operating costs. This will boost the agricultural sector, bringing greater yields to the various crops in our country.

View: https://www.youtube.com/watch?v=1pr9qaib0WY
What are the characteristics of the Aero Agro AA-100?
Fumicaña Ltda is characterized by innovation and the advanced technology developed over the years. This has been demonstrated by the Aero Agro AA-100 aircraft, which is characterized by its ultralight nature, a spraying speed of less than 120 kilometers per hour, and is equipped with satellite technology, guaranteeing greater coverage and excellent results in its application work.
1747355045781.webp
How does it work?
The effectiveness and widespread acceptance of the aircraft has been due to its precision agriculture system (satellite flagging), accompanied by pre-calibrated spraying equipment that guarantees greater coverage and uniformity in the crop. It is worth noting that the engine, being located at the rear and above, does not influence the spray trail, providing greater safety and uniformity when performing its work.

With the use of this technology, how much could costs be reduced?
Using ultralight aircraft reduces application costs by more than 30% due to the aircraft's low operating cost and the ability to operate at ultra-low volumes. This results in a homogeneous droplet size, greater coverage, and greater efficiency when aerial spraying crops.

How many sugar mills use this type of ultralight aircraft for spraying?
Currently, the entire sugar industry has implemented aerial spraying using ultralight aircraft, especially due to their low operating costs, advanced technology, and environmental friendliness. Fumicaña Ltda has been known for providing its services to a large portion of the sugarcane sector, taking into account the demands and standards these large companies have achieved over time.

What is the maximum and minimum height the aircraft can reach?
Due to its configuration and the task at hand, it is capable of flying up to one meter above the crop. However, thanks to its excellent aerodynamic design and powerful engine, it achieves a service ceiling of 10,000 feet (3,048 meters), covering all terrains in our country.
1747355005343.webp
What factors make this aircraft environmentally friendly?
Its "pusher" engine configuration (located in the rear) makes it environmentally friendly, and we operate with lead-free fuels. This reduces polluting emissions. Furthermore, the aircraft's low-speed flight and the use of a large droplet size for spraying prevent the droplets from evaporating and polluting the environment.
 
Last edited:
Óscar Wenceslao Mora Velázquez, director of the company EN-TI, said that Mexico will capture double the investment in the aerospace industry in the next 3 to 5 years, due to the relocation of value chains and the experience of the companies in the manufacture of aircraft parts.

“With the numbers we are seeing, investment will double very quickly,” he said during the conference Nearshoring Aerospace: Mexico's Opportunity in the New Industrial Geopolitics Institution held as part of the Aerospace Fair Mexico (Famex) 2025.

In 2024, the aerospace industry received investments for US$11.4 billion dollars, but the arrival of capital for more than US$22 million dollars is projected, said the Mexican businessman.

“Mexico has a lot of knowledge, we manufacture a lot of maquilas and telecommunications, fiber optics and lasers could follow,” said the member of the Mexican Federation of the Aerospace Industry (FEMIA).

“There are interesting movements in a world market in which Mexico is in the Top 10 of the aerospace industry”, commented the founder and member of the Organizing Committee of Famex for the last 10 years.

He added that there are interesting conversations to have a maintenance hub in the south of Mexico for the European company Airbus and Lufthansa.

Mexico's Oaxaca Aerospace has aircraft for primary military maneuvers, which have an autonomy of 5 to 10 hours of flight time.

“For the aerospace industry this is a great opportunity that is happening, despite the crisis,” he said.

He said that Mexico is a worldwide reference in the aerospace industry, since it has very strong aerospace clusters such as in Monterrey, Querétaro, Chihuahua, Baja California, and there is a strong participation in Oaxaca and Yucatán.

AGSA Technologies
Welcome to the World of Technological Efficiency
We provide cutting-edge products and services for quality control and assurance, enabling our clients to produce in less time and with greater efficiency. We also offer innovative solutions tailored to each specific need.
1747405846520.webp
Our clients turn to us when they are looking for a comprehensive, customized engineering solution. From the initial idea to final implementation, we work closely and collaboratively with our clients to achieve the best results for each project
1747405860721.webp

Results that speak for themselves
We have overcome quality challenges for clients in industries such as Automotive, Aerospace, Energy, and Heavy Industry.
1747405875703.webp
3D Scanning The Falcon 2: Horizontec and AGSA TECH
1747405887318.webp



View: https://www.youtube.com/watch?v=y8iinHhzTcg
 
At Grupo SSC, we are experts in engineering simulation in the fields of structural, thermal, fluid, electromagnetic, optical, additive manufacturing, and 3D design. As representatives of Ansys Inc. for over 32 years in Mexico, we are the leading, pioneering, and largest company offering our clients the best software tools, consulting, training, mentoring, and technical support.
1747545640198.webp
1747545667646.webp


View: https://www.youtube.com/watch?v=UND9Ky3FfaE

Manta Ray Project: From the Classroom to a "Made in Mexico" Certification

Ulises Gutiérrez / Wednesday, May 14, 2025 - 01:00
THE AIRCRAFT CREATED BY UNIVERSITY STUDENTS COST 350,000 PESOS, CAN FLY UP TO 200 METERS, AND ITS PURPOSE IS TO ASSIST IN RESCUE MISSIONS.

FAMEX
Professor Víctor Leyva and the six students from the Centro Universitario Latino Veracruz (CEULVER) who brought the Manta Ray Project, an electronically manned aircraft, to life, never expected their end-of-semester project to flood social media, make national news, and even receive a "Made in Mexico" certificate from Marcelo Ebrard, Secretary of Economy, at the recent Mexican Aerospace Fair (FAMEX).

While the virality of their aircraft earned them applause and an invitation to FAMEX, the recognition they received on April 25th came just a few days earlier, all thanks to the fact that their neighbors at the exhibition were part of the certification committee, which also received other projects such as the Halcón 2, a Mexican aircraft developed in the Celaya area.

1747545777865.webp
"We didn't even know (about the recognition), but they told us the Secretary wanted to see the aircraft. The people from 'Hecho en México' were next to our stand, and they encouraged us to quickly submit the paperwork and wanted the Secretary to present it to us," Leyva revealed in an interview with A21.



In addition to giving the recognition, Ebrard boarded the aircraft, posed for photographs, and even signed the fuselage, but he wasn't the only one to do so; President Claudia Sheinbaum herself also learned about the project.

“On April 22, there was a public launch at FAMEX. President Claudia Sheinbuam came by and did us the favor of signing it. She extended her support; we are very happy that something in a classroom has become this,” Leyva added.

The Manta Ray Project cost 350,000 pesos, not including labor. This money was provided by the University. The students involved are third- and fourth-year students studying automotive mechanics and mechatronics.

It has a payload capacity of 140 kilograms, can fly up to 200 meters high for 20 minutes, and has a radio range of 3 kilometers. However, the tests conducted so far have been limited to flying the aircraft on private land and at no more than 5 meters, although it has already been manned.

“We've been working on the project for four months. People have been very supportive; it went viral on social media. We didn't expect this; it was a classroom project for the end of the semester, but it's attracted a lot of attention,” the professor said.

Leyva acknowledged that the aircraft needs improvements in safety, design, and materials, but that requires a larger investment.

1747545820020.webp
“We can't compare ourselves to a company, where there's financing, engineering, and computer equipment to process the designs. We did it in a classroom; perhaps that's our merit,” he said, although there have already been approaches from private companies following the drone boom.
1747545856855.webp
Regarding its uses, the Manta Ray Project can assist in emergency situations such as fires, earthquakes, or for urgent transportation of people.

For now, both the teacher and the students are enjoying what they've achieved, but if they've already fulfilled their dream of being at FAMEX, receiving certificates and congratulations from both Ebrard and Sheinbaum, and making national news, those involved aren't ruling out seeing an improved and authorized version of their aircraft in action.
1747545914594.webp
1747545925745.webp



View: https://www.youtube.com/watch?v=GahAsVnYjQo
 
THE "KUNTUR" PROJECT. By June 2006, the FAP command decided that the Ceman technical staff was more than ready to enter the major leagues and approved the "Kuntur" Project. In June 2008, the project began to be implemented resolutely. Time passed quickly in hangar 1009 at the Las Palmas Air Base.
In April of this year, the penultimate stage of construction was completed. The engine (made in the United States) was installed, and the aircraft was "taxied." In aeronautical jargon, this means running on the runway at maximum speed, without taking off. In the months prior to the start of the project, the aircraft was "taxied." Its operation was verified on the Engine Department's test bench. The fuel, electrical, communications, and avionics (flight instrument) systems were also tested. The magnetic compass was then calibrated on the compass rose on the Las Palmas airfield runway.
The Kuntur is in the prototype stage and will begin the flight phase in June, for which ground tests are being finalized.
1747575475634.webp
1747575604507.webp

View: https://www.youtube.com/watch?v=SKq5uxqjJzQ
 
CREATION OF THE NATIONAL AIRCRAFT FACTORY (FANAERO-CHILE).

The creation of the National Aircraft Factory (FANAERO-CHILE) was made official with the publication of Decree Law No. 101 in the Official Gazette on June 27, 1953, with the following heading:

No. 101.- Santiago, May 29, 1953.- Bearing in mind:

That it is necessary to promote activities related to the design and construction of airplanes and gliders in the country;

That the Air Force Central Workshop is fully capable of providing the maintenance services it must provide to the Institution in fulfilling its primary function;
That there is no other establishment that may be used for the manufacture of aircraft, and
Exercising the powers conferred upon me by Law No. 11,151, I hereby issue the following

Decree with the force of law:

Article 1: The National Aircraft Factory (FANAERO-CHILE) is hereby created, an organization with legal personality and autonomous administration, which shall have its own assets and shall be governed by the provisions of this Decree Law and the Regulations to be issued later. Its purpose shall be the construction of all types of aircraft, gliders, spare parts, and other aeronautical elements that directly or indirectly relate to the needs of national defense and, in general, to the promotion of aeronautical activities in the country.

It may also manufacture and trade all types of machinery, tools, and industrial articles.

In this extensive Decree Law Under Law No. 101, FANAERO-CHILE was allocated $200,000 from Law No. 7,144, which created the National Defense Council (CONSUDENA) on December 31, 1941, and was published on January 5, 1942.

The following year, this consolidated D.F.L. creating the National Aircraft Factory (FANAERO-CHILE) was formalized in a consolidated text. It included, in addition to D.F.L. No. 101, D.F.L. No. 239 of July 30, 1953.

CREATION OF THE NATIONAL AIRCRAFT FACTORY (FANAERO-CHILE).

The creation of the National Aircraft Factory (FANAERO-CHILE) was made official with the publication of Decree Law No. 101 in the Official Gazette on June 27, 1953, with the following heading:

No. 101.- Santiago, May 29, 1953.- Bearing in mind:

That it is necessary to promote activities related to the design and construction of airplanes and gliders in the country;

That the Air Force Central Workshop is fully capable of providing the maintenance services it must provide to the Institution in fulfilling its primary function;
That there is no other establishment that may be used for the manufacture of aircraft, and
Exercising the powers conferred upon me by Law No. 11,151, I hereby issue the following

Decree with the force of law:

Article 1: The National Aircraft Factory (FANAERO-CHILE) is hereby created, an organization with legal personality and autonomous administration, which shall have its own assets and shall be governed by the provisions of this Decree Law and the Regulations to be issued later. Its purpose shall be the construction of all types of aircraft, gliders, spare parts, and other aeronautical elements that directly or indirectly relate to the needs of national defense and, in general, to the promotion of aeronautical activities in the country.

It may also manufacture and trade all types of machinery, tools, and industrial articles.

In this extensive Decree Law Under Law No. 101, FANAERO-CHILE was allocated $200,000 from Law No. 7,144, which created the Higher Council of National Defense (CONSUDENA) on December 31, 1941, and was published on January 5, 1942.

The following year, this consolidated D.F.L. creating the National Aircraft Factory (FANAERO-CHILE) was formalized in a consolidated text. It included, in addition to D.F.L. No. 101, D.F.L. No. 239 of July 30, 1953.
1747576413906.webp
The first flight of the Chincol prototype, which can be considered the official one, took place on December 14, 1955, at El Bosque, and was not without its setbacks. On that occasion, the logbook indicates that, 20 minutes into the flight, Captain Andrade, who was accompanied by engineer Davins, detected an increase in oil temperature, which is why he decided to land in accordance with safety protocols for this type of incident.
During the following week, and according to Captain Andrade's report, the Chincol underwent several adjustments and tests on its Continental 0-470-11 engine, until the aforementioned oil overheating problem was partially resolved.
These adjustments did not involve modifications to the oil cooler or other engine components; rather, the front air deflector grilles were removed and some side openings were made in the engine cowling to allow greater airflow for more effective cooling.
After the Christmas holidays, on December 27th, the Chincol, once again under the command of Captain Andrade, took to the skies heading for Quintero Air Base, this time to conduct aerodynamic tests at sea level. By this time, the Chincol had already accumulated 6:25 flight hours.
The following day, Captain Andrade performed all kinds of demanding tests on the aircraft, such as dives, approaching the stall with and without the engine, acrobatic maneuvers, and so on, confirming that the Chincol performed normally, remaining very docile and controllable.
On the 29th, the Chincol was inspected on the ground by engineer Davins to verify its structure, confirming the perfect condition of its systems.
Thus, we reached December 30th, a day in which two flights were made, one in the morning and the other in the afternoon, totaling 3:05 hours. This time, the aircraft climbed to 12,000 feet to perform stall maneuvers on the straightaway and in turns, also verifying that the elevator, aileron, and rudder controls were responding normally.
During the New Year, the Chincol and its crew had no rest. That day, the aircraft flew at 3,000 feet along the coast in turbulent conditions, and Andrade was able to reach a speed of 187 km/h (115 mph), flying at 2,250 rpm.
1747576462018.webp

On January 2, 1956, the aircraft climbed to 15,000 feet to perform various maneuvers that were classified as normal. In a dive, the aircraft reached a speed of 241 km/h (150 mph), but Captain Andrade recommended not exceeding that speed because the engine was vibrating.
The following day, the aircraft continued climbing, reaching 18,000 feet, the Chincol's projected service ceiling, and the aerobatic maneuvers continued as normal. Flight tests continued until January 25, 1956, totaling 29:05 hours. During these days, Captain Andrade reached a ceiling of 19,850 feet (6,050 meters) without the use of oxygen.
He also recommended changing the propeller because, during looping tests, it was found that this element was slowing the aircraft down, and during Immelmann maneuvers, the propeller made it difficult to gain speed because it caused the engine to vibrate at 2,500 RPM.
A raid was subsequently made to Mendoza, and upon return, several demonstration flights were conducted before various authorities and at several Air Clubs across the country. Captain Andrade accumulated 55.55 flight hours in the Chincol, making 79 landings in this prototype, and his last documented official flight in this aircraft was on October 4, 1956. However, in December 1956, while already assigned to the General Staff and serving as Assistant to Information Department II, he allegedly made some flights in the Chincol, the only means of verification being Brief Communication No. 19/86 from the Maintenance and Engineering Department, dated December 7, 1956, authorizing him again to fly the aforementioned Chincol prototype.
1747576481187.webp

1747576501606.webp

1747576527646.webp

 
1747825098460.webp



The Waman is an Argentine-designed and manufactured light training aircraft with a 100-horsepower Rotax engine and a cruising speed of 90 knots.
1747825116074.webp
The Waman aims to compete at the top of the LSA (Light Sport Aircraft) spectrum, so it combines a low-maintenance Rotax engine with a "Made in Italy" interior design.


View: https://www.youtube.com/watch?v=ASNx9byalTY
 
  • Anniversary marks Bombardier’s long-term commitment and contribution to the development of a leading aerospace industry in Mexico
  • Completion of the 100thGlobal 7500 aircraft rear fuselage by Querétaro’s dedicated and skilled employees marks another significant milestone in the flagship program’s learning curve acceleration
Bombardier is proud to announce the 15-year anniversary of its world-class manufacturing operations in Querétaro, Mexico. The achievement is further highlighted by the site’s recent completion of the 100th rear fuselage for the industry flagship Global 7500 business jet, underscoring the talent and skill of its dedicated employees.
1747826580920.webp
1747825282448.webp

1747825300293.webp
1747825356206.webp
1747826270872.webp
Bombardier CEO Eric Martel assured that the Querétaro-based construction plant will continue to grow as part of its future development; it currently manufactures fuselages and other components for luxury private aircraft.

He added that this facility carries out the design, manufacturing, assembly, and machining of large metal and composite structures, including electrical harnesses for aircraft such as the Global 5500, Global 6500, Global 7500, as well as the Challenger 350 and Challenger 650.
1747826511762.webp
Sixteen years after arriving in Querétaro, Eric Martel said he is very pleased with the quality of work performed at this plant, and also acknowledged that the costs are good.

 
Last edited:
1747826840785.webp

Bombardier opens Learjet aircraft component plant in Mexico​

RP news wires

Bombardier Aerospace on October 28 announced that it has inaugurated its new Learjet 85 aircraft component manufacturing facility at its site in the Queretaro Aerospace Park in Queretaro, Mexico.

According to a release, Felipe Calderon Hinojosa, President of Mexico, and Jose Calzada Rovirosa, Governor of the State of Queretaro, joined Pierre Beaudoin, president and CEO, Bombardier Inc., and Guy C. Hachey, president and chief operating officer, Bombardier Aerospace, to mark the occasion.

The construction of the 185,000-square-foot (17,187-square-meter) Learjet 85 aircraft component manufacturing center was completed in July 2010. The fabrication of development parts soon followed, and the fabrication of parts for the first aircraft is now underway. In addition, more than 36,300 square feet (3,370 square meters) of existing space at the Queretaro site has been allocated to the Learjet 85 aircraft program. This brings the total Learjet 85 aircraft footprint at the Queretaro manufacturing site to approximately 221,300 square feet (20,560 square meters) in order to support composite fuselage manufacturing and wing assembly.

"We are honored to inaugurate our new Learjet 85 aircraft component manufacturing facility in the company of President Calderon and Governor Calzada," said Beaudoin. "Bombardier's operations in Mexico are an important part of the company's global strategy. The professionalism and commitment that our employees in Mexico have shown have driven many of the achievements that we have accomplished since the opening of our first Mexican facility in 2006. The increasing complexity of the work being undertaken in Queretaro also affirms Bombardier's confidence in its Mexican operations."

The company noted that the Queretaro facility is responsible for the fabrication of the Learjet 85 aircraft's major composite structures. During the past three months, more than 150 tools, including many lay-up tools, have been fabricated and shipped to the new Learjet 85 aircraft component manufacturing site. Equipment installation has progressed well with the completion of the clean room for lay-up activity, freezer installation to house the composite material, and installation of three ovens.

"We are on target with all of our program objectives, and production of the first composite parts for the Learjet 85 aircraft at our Mexico facility is underway," said Ralph Acs, vice president, Learjet 85, Bombardier Business Aircraft.


CHIHUAHUA - Next year, the GKN Aerospace plant in Chihuahua will start producing the so-called giant drones, said Mauricio Herrera, director of the company.

The executive said that in the last edition of the Paris Aerospace Fair, it was announced that the production of the first 15 giant drones will be in its innovation center in Holland, but the current production will be in Chihuahua.

"We are going to venture in this 2024-2025 in the Advance Air Mobility market, which is of great relevance for the city and for the country, since they are the first products that are going to be produced in Mexico with everything related to these giant drones," he said.

In a videoconference organized by the Mexican Federation of the Aerospace Industry (FEMIA) entitled "Aerostructure Manufacturing in Mexico", Herrera commented that more than 500,000 units would be produced annually, volumes that, he explained, they are not used to producing.

The director of GKN Aerospace commented that this company has a presence in 12 countries around the world with 39 sites, four of which are technology centers; in Mexico it has a presence in Chihuahua.

Herrera said that nearshoring should be taken advantage of, because customers in the United States demand to have their products closer, which is why now is the time for the country and Chihuahua to invest in capacities to attract this type of business.

The company currently manufactures parts for the Airbus 320, the Honda HA420 and the Gulfstream, and will seek to manufacture the fuselage of the HA420 in the future, with the exception of the wings.


In 2008, AERNNOVA MEXICO opened two industrial facilities for the manufacture of metallic components and the assembly of large complex aircraft structures, with the aim of providing better access to the North American market and improved cost competiveness within the dollar area.

Both facilities have the most innovative technologies in sheet metal forming, aluminum alloys machining, surface and heat treatment, painting processes, and the assembly and integration of complex structures. All of this, with the customer’s approvals and certifications, as well as airworthiness approvals from corresponding authorities.

AERNNOVA MEXICO is able to address the complete life cycle of the product: From raw material purchasing management to the internal development of the manufacturing process, the design and manufacture of tooling and assembly jigs, the CNC machinery programming with a high degree of autonomy, as well as vertical integration processes. The Company manages international programs and is able to accomplish the highest requirements of OEM customers in a flexible and effective manner.
1747828402292.webp
 
Last edited:
Source | Diehl Aviation

Diehl Aviation (Überlingen, Germany) announces the establishment of Diehl Aviation de Mexico S. de R.L. de C.V. in an industrial park near Querétaro. The site will initially have 8,000 square meters of production/office space and employ around 30 people, growing to 500 staff in the medium term. Start of production, planned for the middle of 2025, will begin with particularly spacious overhead bins for the Airbus A220 assembled in Mirabel, Québec, Canada, and Mobile, Alabama.

Located roughly three hours northwest from Mexico City, the city of Querétaro has become a center of excellence for plastics, composites and aerospace manufacturing and maintenance, including:


For example, Diehl is supplying the cabin interior for the Lilium Jet, including sidewalls, ceiling panels, partitions, the luggage compartment and cabin floor. This interior also includes Diehl’s air conditioning ducts which use lightweight composites and materials such as foam granulates for air outlets.

“So, you even try to become lighter and lighter and lighter,” says Dr. Jörg Schuler, CEO of Diehl Aviation. This trajectory can be seen in the company’s Eco Efficiency products which include the 3D printed Eco Bracket made with 9T Labs’ composites technology, the thermoplastic composite Eco Bin and Eco Therompostic Ducting, as well as the Eco sidewall featuring basalt fiber and bio-based furane resin.


Diehl Aviation’s new location in Mexico is meant to further strengthen cooperation with important customers like Airbus, Boeing, Bombardier, Embraer and large local air carriers. The U.S. is an important growth market for Diehl. Being closer to its customers enables shorter travel and transport routes and more effective collaboration.

This increased responsiveness and local presence will improve Diehl Aviation’s competitiveness in the market. In addition to economic potential, the location in Mexico provides and enables more cost-efficient production, but also reduces product costs and creates a local supply chain. Moreover, Diehl gains access to more qualified employees.

Querétaro boasts a central location, excellent infrastructure, and proximity to Querétaro International Airport. Querétaro is also an important industrial location focusing on the aerospace industry and represents well-known companies such as Bombardier, Airbus, Safran and Delta Airlines.
1747829455214.webp
1747829222073.webp

View: https://www.youtube.com/watch?v=OS5X_kx4Ftg

 
Last edited:

View: https://www.youtube.com/watch?v=j-XdrlVwCT4
1747831182042.webp

1747831217947.webp
1747831266273.webp
Yes, Hydra Technologies was recognized by the Mexican Ministry of Economy as part of the "Made in Mexico" campaign. This recognition highlights the importance of Mexican companies that develop cutting-edge technology, such as Unmanned Aerial Systems (UAS), and promotes national pride in the national industry. This recognition highlights the importance of Mexican companies that develop cutting-edge technology, such as Unmanned Aerial Systems (UAS), and promotes national pride in the national industry.
 
VPN-HSL-468-X60-2x

Latest Replies

Featured Content

Trending Threads

Back
Top