Chinese Economy Watch
- Thread starter rockdog
- Start date
- Joined
- Jul 3, 2024
- Messages
- 1,433
- Likes
- 2,031
Chinese vehicle brands are the worst rated in Mexico
A consumer survey found that the Chinese brand MG had the lowest scores in terms of design and performance satisfaction; in contrast, Toyota was the highest rated.
www.eleconomista.com.mx
A consumer survey found that the Chinese brand MG had the lowest scores in terms of design and performance satisfaction; in contrast, Toyota was the highest rated.
Marcas de vehículos chinos, las peor evaluadas en México
Una encuesta de consumo arrojó que la marca china MG es la de menor puntaje en satisfacción de diseño y desempeño; en contraste, Toyota es la mejor
www.eleconomista.com.mx
- Joined
- Jul 3, 2024
- Messages
- 1,433
- Likes
- 2,031
Do you want to copy Trump? Business leaders propose a 100% tariff on Chinese products in Mexico amid rising smuggling and corruption in customs
Story by Enya M. Contreras • 11 a.m. • 2-minute read
MARKETS TODAY
MEXICO CITY.— The National Chamber of Commerce (Canaco) of Mexico City has proposed a tariff of up to 100 percent on products from China. The initiative stems from the increase in illegally imported merchandise and the impact on formal trade, according to statements by its president, Vicente Gutiérrez Camposeco.
www.informador.mx
MEXICO CITY, May 22 (EL UNIVERSAL) – The president of the National Chamber of Commerce, Services, and Tourism of Mexico City (Canaco CDMX), Vicente Gutiérrez, denounced a new method for selling Chinese products in the capital. These products are now relabeled with the words "Made in Mexico," which has generated losses of billions of pesos for established businesses.
Therefore, he proposed that the Ministry of Economy (SE) impose tariffs of up to 100% on Chinese products.
"One way to illegally introduce, import, or sell Chinese products is by relabeling them and labeling them with 'Made in Mexico.' That is, they bring them in, go to warehouses, and put the label on them there; this scheme is a new method these smugglers are using," he said.
Vicente Gutiérrez specified that the most frequently relabeled products are clothing, handicrafts, and footwear, as well as household appliances, toys, and keys.
es-us.noticias.yahoo.com
Story by Enya M. Contreras • 11 a.m. • 2-minute read
MARKETS TODAY
MEXICO CITY.— The National Chamber of Commerce (Canaco) of Mexico City has proposed a tariff of up to 100 percent on products from China. The initiative stems from the increase in illegally imported merchandise and the impact on formal trade, according to statements by its president, Vicente Gutiérrez Camposeco.
CDMX: Canaco pide imponer aranceles de 100% a productos chinos
Planteó “considerar un endurecimiento contra las importaciones de ese país, con aranceles hasta del 100%, incluyendo a los automóviles y vehículos en general”
www.informador.mx
MEXICO CITY, May 22 (EL UNIVERSAL) – The president of the National Chamber of Commerce, Services, and Tourism of Mexico City (Canaco CDMX), Vicente Gutiérrez, denounced a new method for selling Chinese products in the capital. These products are now relabeled with the words "Made in Mexico," which has generated losses of billions of pesos for established businesses.
Therefore, he proposed that the Ministry of Economy (SE) impose tariffs of up to 100% on Chinese products.
"One way to illegally introduce, import, or sell Chinese products is by relabeling them and labeling them with 'Made in Mexico.' That is, they bring them in, go to warehouses, and put the label on them there; this scheme is a new method these smugglers are using," he said.
Vicente Gutiérrez specified that the most frequently relabeled products are clothing, handicrafts, and footwear, as well as household appliances, toys, and keys.
Productos chinos son etiquetados "Hecho en México"
CIUDAD DE MÉXICO, mayo 22 (EL UNIVERSAL).- El presidente de la Cámara Nacional de Comercio, Servicios y Turismos de la Ciudad de México (Canaco CDMX), Vicente Gutiérrez, denunció que existe una nueva modalidad para vender productos chinos en la capital, los cuales ahora son reetiquetados con la...
- Joined
- Jul 3, 2024
- Messages
- 1,433
- Likes
- 2,031
The OEM-wise car sales figures for April 2025 indicate a tough start to the new financial year for most carmakers in India, excluding Mahindra and MG Motor, which were the only two brands to post positive growth compared to March 2025. Notably, Maruti held onto its top spot, while Mahindra climbed into the top three, joining Tata Motors, as Hyundai dropped in the rankings. Here's a detailed account of how the top 10 carmakers performed in April 2025.
www.cardekho.com
Top 10 Best-selling Car Brands In April 2025: Here’s How Maruti, Mahindra, Tata, Hyundai, Toyota, Kia, Skoda, MG, Honda, And Volkswagen Performed | CarDekho.com
Mahindra and MG were the only two brands to register monthly growth in April, while Honda cars’ sales took the biggest blow, witnessing a sales dip of over 50 percent
www.cardekho.com
- Joined
- Jul 3, 2024
- Messages
- 1,433
- Likes
- 2,031
View: https://www.youtube.com/watch?v=rVl_e1rju68
Recently, some people in China shared that Vietnam has started to crack down hard on Chinese-funded businesses exporting goods.
View: https://www.youtube.com/watch?v=NtcmDTzLWP4
China’s Aviation Doomed, Losing Billions Yearly; Flight Attendants Sell Lottery, Pilots Deliver Food
- Joined
- Jul 3, 2024
- Messages
- 1,433
- Likes
- 2,031
View: https://www.youtube.com/watch?v=_UNwpK1i5PE
Xi Jinping Won’t Fly on China’s C919, Windshield Cracked, Fearing Crash Without Boeing Parts
China’s domestically made C919 passenger jet has been hit with another major setback from the European Union. On April 28, Florian Guillermet, the Executive Director of the European Union Aviation Safety Agency (EASA), said it would take the agency three to six years to certify the C919, which is produced by China’s COMAC.China always hiding it's weakness and lies.
View: https://x.com/leng_ning/status/1925984357518360593?t=m8uJ2FLH03BH8XbhyKLK_Q&s=19
View: https://x.com/leng_ning/status/1925984357518360593?t=m8uJ2FLH03BH8XbhyKLK_Q&s=19
Do you want to copy Trump? Business leaders propose a 100% tariff on Chinese products in Mexico amid rising smuggling and corruption in customs
Story by Enya M. Contreras • 11 a.m. • 2-minute read
MARKETS TODAY
MEXICO CITY.— The National Chamber of Commerce (Canaco) of Mexico City has proposed a tariff of up to 100 percent on products from China. The initiative stems from the increase in illegally imported merchandise and the impact on formal trade, according to statements by its president, Vicente Gutiérrez Camposeco.
CDMX: Canaco pide imponer aranceles de 100% a productos chinos
Planteó “considerar un endurecimiento contra las importaciones de ese país, con aranceles hasta del 100%, incluyendo a los automóviles y vehículos en general”
MEXICO CITY, May 22 (EL UNIVERSAL) – The president of the National Chamber of Commerce, Services, and Tourism of Mexico City (Canaco CDMX), Vicente Gutiérrez, denounced a new method for selling Chinese products in the capital. These products are now relabeled with the words "Made in Mexico," which has generated losses of billions of pesos for established businesses.
Therefore, he proposed that the Ministry of Economy (SE) impose tariffs of up to 100% on Chinese products.
"One way to illegally introduce, import, or sell Chinese products is by relabeling them and labeling them with 'Made in Mexico.' That is, they bring them in, go to warehouses, and put the label on them there; this scheme is a new method these smugglers are using," he said.
Vicente Gutiérrez specified that the most frequently relabeled products are clothing, handicrafts, and footwear, as well as household appliances, toys, and keys.
Productos chinos son etiquetados "Hecho en México"
CIUDAD DE MÉXICO, mayo 22 (EL UNIVERSAL).- El presidente de la Cámara Nacional de Comercio, Servicios y Turismos de la Ciudad de México (Canaco CDMX), Vicente Gutiérrez, denunció que existe una nueva modalidad para vender productos chinos en la capital, los cuales ahora son reetiquetados con la...
Strong demand from Mexico:
View: https://www.youtube.com/watch?v=VQ7ICVcKb1c
View: https://x.com/dunne_insights/status/1924486164049989925?t=gRkPmxa_vjjq9lkg_8jZZQ&s=19
View: https://x.com/tphuang/status/1924762526366990625?t=HB2wI7SutN3jZ2CWcsmuyg&s=19
View: https://x.com/NatBullard/status/1924764568057946604?t=0nseeo9lC2g25ghkRN4Ivg&s=19
Do you want to copy Trump? Business leaders propose a 100% tariff on Chinese products in Mexico amid rising smuggling and corruption in customs
Story by Enya M. Contreras • 11 a.m. • 2-minute read
MARKETS TODAY
MEXICO CITY.— The National Chamber of Commerce (Canaco) of Mexico City has proposed a tariff of up to 100 percent on products from China. The initiative stems from the increase in illegally imported merchandise and the impact on formal trade, according to statements by its president, Vicente Gutiérrez Camposeco.
CDMX: Canaco pide imponer aranceles de 100% a productos chinos
Planteó “considerar un endurecimiento contra las importaciones de ese país, con aranceles hasta del 100%, incluyendo a los automóviles y vehículos en general”
MEXICO CITY, May 22 (EL UNIVERSAL) – The president of the National Chamber of Commerce, Services, and Tourism of Mexico City (Canaco CDMX), Vicente Gutiérrez, denounced a new method for selling Chinese products in the capital. These products are now relabeled with the words "Made in Mexico," which has generated losses of billions of pesos for established businesses.
Therefore, he proposed that the Ministry of Economy (SE) impose tariffs of up to 100% on Chinese products.
"One way to illegally introduce, import, or sell Chinese products is by relabeling them and labeling them with 'Made in Mexico.' That is, they bring them in, go to warehouses, and put the label on them there; this scheme is a new method these smugglers are using," he said.
Vicente Gutiérrez specified that the most frequently relabeled products are clothing, handicrafts, and footwear, as well as household appliances, toys, and keys.
Productos chinos son etiquetados "Hecho en México"
CIUDAD DE MÉXICO, mayo 22 (EL UNIVERSAL).- El presidente de la Cámara Nacional de Comercio, Servicios y Turismos de la Ciudad de México (Canaco CDMX), Vicente Gutiérrez, denunció que existe una nueva modalidad para vender productos chinos en la capital, los cuales ahora son reetiquetados con la...
If there is a war between Cartels and police Mexico, please use our DJI and BYD
View: https://x.com/MyLordBebo/status/1794272369739256125?t=3j2u8Qo-cdj5X3G2MHrBsw&s=19
View: https://x.com/CCL2K30/status/1911025118479786364?t=BbM7b-8FswJw9EB2tqxZBQ&s=19
- Joined
- Jul 3, 2024
- Messages
- 1,433
- Likes
- 2,031
Do you know how many brands are in Mexico?
do you understand 4% of 100%?
and the tariffs are not my decision but the Mexican senate will decide that, so whatever you say or I say does not matter
- Joined
- Jul 3, 2024
- Messages
- 1,433
- Likes
- 2,031
why do not change if the mexican drugs dealers want to make fentanyl use chinese fentanyl precursos not for nothing you got 10% fentanyl tariff by Trump but in that you are silent
You are from low R&D nation, you don't know big civil plane needs certification, and certification takes time.
View: https://x.com/olalatech1/status/1908859761682206851?t=lZjwCLogw8N7QAJX-cy6AQ&s=19
View: https://x.com/ATWOnline/status/1919165159450288473?t=Wc_pd6xhgQdUBH2PI_oZ-A&s=19
View: https://x.com/zhao_dashuai/status/1913882283930509583?t=ca6dieh2XWWoLE0AeRx9RA&s=19
View: https://x.com/aheartkissedbyg/status/1906732104958017698?t=zNd6wb5BoD4qERlivYaP4g&s=19
- Joined
- Jul 3, 2024
- Messages
- 1,433
- Likes
- 2,031
can you update your information, see this
With a $75 million investment, the French group Safran inaugurated its sixth plant in Querétaro and announced an additional $25 million investment for further expansion of its operations in the state.
In partnership with the American firm Albany, the company will produce composite blades for the new generation of LEAP engines at its sixth plant. This is the third joint venture between Safran and Albany, similar to and complementary to those already located in the United States and France.
Company executives and government representatives during the inauguration of Safran's sixth plant.
» Company executives and government representatives during the inauguration of Safran's sixth plant.
The parts produced in Querétaro are intended for LEAP-1B engines assembled in the United States to equip the Boeing 737 MAX aircraft.
Safran's sixth plant delivered its first blades in October 2017. It currently employs 230 people and is expected to reach 600 by 2021. It projects an annual production of more than 20,000 blades and 31,000 OGV parts for that year.
Philippe Petitcolin, CEO of Safran, noted that Mexico will make an important contribution to the future of the group, which currently ranks as the third largest aeronautical player in the world.
Inaugura Safran sexta planta en Querétaro
En asociación con Albany, Safran producirá álabes de materiales compuestos para la nueva generación de motores LEAP
www.somosindustria.com
The manufacturer urgently needs to reach that production goal to ensure better resource flow after losing nearly $12 billion in 2024. It also presented its annual safety report.
FAA Boeing
Boeing reported that it expects to stabilize production of its 737 MAX model at 38 aircraft per month over the course of the year, according to Doug Ackerman, vice president of Quality for Boeing Commercial Airplanes, during a conference call with journalists in the United States.
AT Engine inaugurates aerospace plant in Sonora - MEXICONOW
Sonoran authorities inaugurated in the state an aerospace plant of AT Engine, a German company.
mexico-now.com
AT Engine Inaugurates Sonora Plant
Sonora has a new aerospace manufacturing plant courtesy of AT Engine, which is expected to generate 400 aerospace jobs.
mexicobusiness.news
Altaser is part of Grupo Punto Alto GPA http://www.grupopuntoalto.com/sectores-estrategicos/sector-aeronautico/altaser/
Aircraft Parts Manufacturing
This is Altaser's specialty, particularly machined parts for the fixed and moving parts of the turbine, the most complex branch when it comes to producing units for the aerospace sector.
Altaser Aerospace | LinkedIn
Altaser Aerospace | 812 Follower:innen auf LinkedIn. Altaser surge en 2012, desde el Centro de Desarrollo de Proveedores, el proyecto tuvo el objetivo inicial de incentivar la manufactura de exportación a nivel global e integrarse a la cadena de valor internacional para arraigarla en México...
Altaser | Grupo Punto Alto
Altaser surge en 2012, desde el Centro de Desarrollo de Proveedores de Chihuahua, el proyecto tuvo el objetivo inicial de incentivar la manufactura de exportación a nivel global e integrarse a la cadena de valor internacional para arraigarla en México, creando valor para los inversionistas...
www.grupopuntoalto.com
The Mexican company has three business units: the Engineering and Innovation Center (CEI2), the Integrated Circuit Design Center (CEDIC) and the chip manufacturing plant (FAB1), which will allow it to meet both national and international demand for semiconductors from design to manufacturing.
Inaugura QSM Semiconductores planta en Querétaro
Fue inaugurada QSM Semiconductores en el municipio de Corregidora en Querétaro, según autoridades informaron que esta es la única empresa a nivel nacional que se dedica al desarrollo de chips semiconductores.
Inaugura QSM Semiconductores planta en Querétaro
Fue inaugurada QSM Semiconductores en el municipio de Corregidora en Querétaro, según autoridades informaron que esta es la única empresa a nivel nacional que se dedica al desarrollo de chips semiconductores.
La visión MIMSA: claves de un TIER1 en la industria aeroespacial
Noticias posted by Admin User - Blog Author about La visión MIMSA: claves de un TIER1 en la industria aeroespacial on Metal Mecanica.
www.metalmecanica.com
Mimsa, maquinados de calidad para la industria | MexicoIndustry
Hace más de 40 años, Raymundo López Alarcón inició la empresa Maquinados Industriales Mitras SA de CV (MIMSA) como un pequeño taller de maquinado en
View: https://www.youtube.com/watch?v=girj4RrmyAQ
Multifunctional Fuselage Demonstrator: The final welds
Source | Safran Aircraft Engines
In late November 2024, Safran Aircraft Engines (Paris, France) inaugurated a new assembly line as part of the extension of Safran’s Mexico plant in Querétaro. These new capacities will be dedicated to engines’ fan and turbine final assembly to support the CFM LEAP production ramp-up. It is in line with the investments Safran is making to build up its LEAP engine MRO network.
Safran expands LEAP engine production capacity in Querétaro
New capacities covering entire single-aisle commercial aircraft engine life cycle strengthens Safran’s footprint in Mexico.
www.compositesworld.com
Last edited:
Similar threads
Latest Replies
-
Russian Ukrainian War
- asl001
-
Indian Air Force: News & Discussions- FalconSlayers
-
Indian Special Forces- Unknowncommando
-
Idiotic Musings from the West- Sanglamorre
-
Chinese Economy Watch- E-195
-
US: News & Discussions
- Miss Firing
