Personal concepts (5 Viewers)

For vehicles i was professing a distributed shotgun based pellet system which allows it to target even low flying drones with radar panels for hemisphere around vehicle coverage.
Hmm... automatic shotguns with drum mags, might work.
 
Problem with what you are proposing is that it wont be able to target low flying drones, flying below system fov. You would need distributed detection and interception system for large vehicles such as armored cars, troop carrier trucks or even all terrain Armados.
> Made a generic 8x8 armoured vehicle; 8m long
> Mounted a Unirobotics RWS with -10° elevation
> Made everything to 1:1 scale
Now let's see where the blind spot would be while shooting low flying drones
Screenshot 2024-11-15 182326.png
Just 12m away from the vehicle.
If a guy manages to sneak 12m away from your vehicle and then launch a FPV then you've much bigger issues to worry about than your RWS's blind spots.

And as for detections, you don't need anything for detection as after few years Active Protections Systems would become staple on armoured platforms and with them, you'll get 4 AESA radars covering almost 360°.
 
> Made a generic 8x8 armoured vehicle; 8m long
> Mounted a Unirobotics RWS with -10° elevation
> Made everything to 1:1 scale
Now let's see where the blind spot would be while shooting low flying drones
View attachment 15413
Just 12m away from the vehicle.
If a guy manages to sneak 12m away from your vehicle and then launch a FPV then you've much bigger issues to worry about than your RWS's blind spots.

And as for detections, you don't need anything for detection as after few years Active Protections Systems would become staple on armoured platforms and with them, you'll get 4 AESA radars covering almost 360°.
Hope such system is able to multi detect and target.
 
Lad liye sab? Ho gayi behas?
Ab chalo ateet mein, chhe saal peechhe

View attachment 15401

It's been almost 6 years since multiple firms from multiple nations are offering M230LF with air-burst ammunition on a RWS; some even with AESA radar.
L&T makes a 40mm version of the same.
Its getting in service with AAD, IAF and IN.

Need a smaller version with Bushmaster or similar footprint gun.
 
Does anyone know if the IAF(TACDE) ever had or planned an aggressor squadron with non soviet aircrafts for adversary training?
 
Hmm... automatic shotguns with drum mags, might work.
@Anants
if we assume this device is sitting on top of a vehicle ,the barrel has to cover the area of an hemisphere, visualising half a medicine ball positioned on top of vehicle.

three options that come to mind :
- developing a new or adding a shotgun barrel to an existing RCWS.
- multiple barrels covering all directions of the hemisphere, with dedicated electronic striker(if such a thing exists) for each barrel. trigger is controlled by an algo.
- a rotating mechanism for a shotgun barrel to be positioned in the direction of the incoming drone.
 
For vehicles i was professing a distributed shotgun based pellet system which allows it to target even low flying drones with radar panels for hemisphere around vehicle coverage.
Hmm... automatic shotguns with drum mags, might work.
@Anants
if we assume this device is sitting on top of a vehicle ,the barrel has to cover the area of an hemisphere, visualising half a medicine ball positioned on top of vehicle.

three options that come to mind :
- developing a new or adding a shotgun barrel to an existing RCWS.
- multiple barrels covering all directions of the hemisphere, with dedicated electronic striker(if such a thing exists) for each barrel. trigger is controlled by an algo.
- a rotating mechanism for a shotgun barrel to be positioned in the direction of the incoming drone.
Itna!

Simply make an anti-UAV "round" for your existing APS launcher. This round would be 3-4x smaller than the standard anti-ATGM APS round and would be pretty much similar to a shotgun shell. A typical APS can have 2x APS and 4x anti-UAV rounds. Everything else (radar, turret, RWS, multi barrel) is already there on the APS
Screenshot_2024-11-18-19-45-27-06_6bcd734b3b4b52977458a65c801426b0.webp
IronFist for example
 
Itna!

Simply make an anti-UAV "round" for your existing APS launcher. This round would be 3-4x smaller than the standard anti-ATGM APS round and would be pretty much similar to a shotgun shell. A typical APS can have 2x APS and 4x anti-UAV rounds. Everything else (radar, turret, RWS, multi barrel) is already there on the APS
View attachment 15714
IronFist for example
Yeah, but we are talking about handling a swarm, and for that M230 type set up with air burst ammo would be a better fit than an APS, in my opinion that is.
 
Yeah, but we are talking about handling a swarm, and for that M230 type set up with air burst ammo would be a better fit than an APS, in my opinion that is.
Well it's considering you already have APS on all your armoured vehicles so why not optimise them too for anti-UAV? If you already have 4x AESA for APS and trainable launchers then it can be the most cost effective and easiest to implement option.

As for M230 based system then we can a the recent trend has already started to move toward replacing the .50 Cal RWS with a 30mm one; AbramsX, EMBT all of them
 
Well it's considering you already have APS on all your armoured vehicles so why not optimise them too for anti-UAV? If you already have 4x AESA for APS and trainable launchers then it can be the most cost effective and easiest to implement option.
I'm not saying don't do that, just that they won't be as effective in handling larger swarms (we ARE to go up against the fucking Chinese of all people after all) as an RCWS would. Or you would have redesign the APS so that it can hold more shots.
As for M230 based system then we can a the recent trend has already started to move toward replacing the .50 Cal RWS with a 30mm one; AbramsX, EMBT all of them
Yeah, and apparently the Chinese as well.
 
Personal Concept : A dedicated Drone Devlopment Programme similar to the Integrated Guided Missile Development Programme a Integrated UAV Development Programme if you will, spearheaded by a totally new DPSU (similar to Bayraktar Technologies Ltd) and since all these UAVs will mostly be developed paralley (or nearly simultaneously) the focus would be to reuse as many technologies as possible to reduce development time, testing and cost

* All the UAV's mentioned here will have very realistic specifications (somewhere in between DRDO incompetence and Israeli IAI level bullshit)

UAV-1

INSPIRATION

1750848889457.webp
1750848931325.webp
1750849075551.webp

PROJECTED SPECIFICATIONS
Engine - 75 hp Wankel Engine
Endurance - 12 hrs
Altitude - 24,000 ft
AUW Weight - 750 kg
Payload Weight - Nearly 100 kg (4 Nag Mk 2 or equivalent Missiles) (Excluding EO systems)
Comparable System - Chinese CH 3A
 
Last edited:
UAV-2

INSPIRATION

1750851142952.webp

PROJECTED SPECIFICATIONS
Engine - 220hp Piston Engine
Endurance - 24 hrs
Altitude - 30,000 ft
AUW Weight - 1750 kg
Payload Weight - 350 kg (Excluding EO systems)
Comparable System - Chinese CH 4, Israeli Heron MK-2, American MQ-1
 
Last edited by a moderator:
UAV-4

INSPIRATION
1750854747684.webp1750854395470.webp

1750855810029.webp
1750855499299.webp
PROJECTED SPECIFICATIONS
Engine - 1000hp Turboprop Engine
Endurance - 30 hrs
Altitude - 36,000 ft
AUW Weight - 5250 kg
Payload Weight - 1250 kg (Excluding EO systems)
Comparable System - Chinese CH5, Israeli IAI Heron-TP, American MQ-9
 
Last edited:
UAV-5

INSPIRATION
1750857566432.webp
1750856882035.webp
PROJECTED SPECIFICATIONS

Engine - 2 × 1000hp Turboprop Engine
Endurance - 36 hrs
Altitude - 42,000 ft
AUW Weight - 10,000 kg
Payload Weight - 2000 kg (Excluding EO systems)
Comparable System - Eurodrone
 
Last edited:

Users who are viewing this thread

Latest Replies

India's Best Clothing store

Featured Content

Optimize your PC & Mobile

Trending Threads

Premium Web Hosting

Back
Top