Indian Small Arms and Weapons

VictorDelta4 said:
The barrel is kinda bugging me as well!
Click to expand...
The barrel in itself is fine, the problem is that Chinese airsoft scope. It's so long that it'll interfere with the barrel handle when you'll try to unlock it for barrel removal.

The bigger problem here is that you can't put lipstick on a pig. FN MAG has already reached the highest potential of upgrade possible and now it's just a technological plateau from here. This is the only reason why SIG Sauer and IWI and FN Herstal, everyone started with a clean slate disign for the MAG successor.
 
Ayan Barat said:
Hehe...okay

Now tell me how would you change the barrel!?
Click to expand...
Forgot to add I would absolutely remove that shit and put an elcan on top.
Also the barrel has a Handel, so maybe the actual product will feature
 
Baseplate said:
Forgot to add I would absolutely remove that shit and put an elcan on top.
Also the barrel has a Handel, so maybe the actual product will feature
Click to expand...
It could be that the barrel handle does not go all the way to 12 o clock, and can be pulled backwards to slide the barrel in order to change it.
 
Baseplate said:
Also the barrel has a Handel, so maybe the actual product will feature
Click to expand...
VictorDelta4 said:
It could be that the barrel handle does not go all the way to 12 o clock, and can be pulled backwards to slide the barrel in order to change it.
Click to expand...
Or may be, they didn't even bother to consider things like whether you can remove the barrel or not, cheek rise, eye relief on such scope, absolute tiny field of view on an area weapon and just slapped the most "hi-tech looking" thing to give it an impression of advanced...aise hi, sexy lagg raha tha

As I've always said, unless you get a true defence nerd in manufacturing you'd never get high quality product. This the same with LML too. Just go through this poster
khh.png"Lightweight and Reliable" and also "Robust and Reliable". Pins being captive is such a big thing that it needs to be mentioned.
And what the heck is a "Double Pull Precision Trigger? I've heard everything from single action, double action, single stage, two stage, set, hair, hammer, striker...what's this!?
 
ezsasa said:
what does asmi's timeline look like, which year first news came out that it was being developed, first display etc. ?
Click to expand...

I am also interested in the chronology.

Also were DPSUs involved in any level of development/manufacturing? or was it literally just Lt Col Bansod and this Lokesh Machine Tools?.

Wonder if making them responsible for their own gear is the antidote to the current merry go round of contrived specifications -> trials -> more feature demand -> fails trials because of contrived specs -> more trials -> new spec compliant to foreign maal specs
 
KAB7777 said:
Only these 2 that I know of.
I feel that the system of 60:40 ratio might be followed with 60 in favour the L1 bidder and 40 to the L2 at the same price quoted by L1 like the ATAGs program or the 2 parties have freedom to bid on their own, we’ll probably find out much later.
Click to expand...
But in ATAGS case both offer something different, right? Here the situation is more like that naval contract where L&T was L2 and some L1 PSU got the order and then L&T was the one actually manufacturing it.

Btw we now have a fully functional
ASMI-C
.
Ayan Barat said:

View: https://youtu.be/zyENLIpH6vk?feature=shared


The lowest I've heard is the one form a local firm called TACTIX. In fact they have actually supplied army with some and the price per kit was ₹14,876.
I'm bit sceptical on how they managed such price but ya, mathematically it's the lowest.

As for upper end, you can easily end up beyond $750 with high quality accesories.
Click to expand...

It wasn't Tactix but Jai Durga Engineering. Tactix just went down the rabbit hole with JDE, but at last even they surrendered. 14k for the things in the tender was in no way a break even cost.
 
Last edited:
SKC said:
Are these the AK-203 from Amethi Gun factory? That is some serious built quality!
Click to expand...
Only if you're comparing it to OFB crap

In this day and age, that's the bare minimum build quality one should expect with the advances in machining techniques available out there
 
Ayan Barat said:
and just slapped the most "hi-tech looking" thing to give it an impression of advanced...aise hi, sexy lagg raha tha
Click to expand...
LOL I bet this is how it went! fuck everything else. just slap anything on it that looks good to them!
 
BlackViking said:
It wasn't Tactix but Jai Durga Engineering. Tactix just went down the rabbit hole with JDE, but at least even they surrendered. 14k for the things in the tender was in no way a break even cost.
Click to expand...
Unnees Bees
GKx7GXRXAAAn1dA.jpeg
Btw, it's been almost a month, and you've still not answered my question.
What's the name of your startup?
 
You must log in or register to reply here.

Similar threads

haldilal
INSAS - Indian Small Arms System
5 6 7
Replies
124
Views
4K
Corvus Splendens
Corvus Splendens
Indx TechStyle
  • Sticky
SOP for Posting in Indian Space Section
Replies
0
Views
84
Indx TechStyle
Indx TechStyle
Vinash
Indian state is an enabler of Hindu genocide in Bangladesh
Replies
9
Views
606
samsaptaka
samsaptaka
hkdas
Indian Army capturing Chinese PLA Soldiers(in Arunachal Pradesh?)
Replies
4
Views
642
Yuyutsu
Yuyutsu
Unknowncommando
Indian Air Force's MiG-29UPG
Replies
0
Views
183
Unknowncommando
Unknowncommando

Latest Replies

Featured Content

Trending Threads

Share this Site

VPN-HSL-250-X250
Back
Top